LUMINEX NETWORK INTELLIGENCE

■GigaCore 12

Connectivity:
12 x 10/100/1000Mbps Ethernet connections on Neutrik Ethercon connector
(10 on the front , 2 at the rear)
1 x IEC power inlet

Features:
Wire-speed Layer 2/3 Switching
Sound protocol compliant: Low jitter
Industry specific web interface
RLinkX: Activate redundancy on ports to create secured links
Group: Create group within your network for a better network isolation
Port status
3 LEDs per port: PoE, RLinkX, Link/Speed
4 status LEDs for the device: OK, PoE, RLinkX*, Power
1 x fan
Universal power supply: 100-240VAC

Options:
PoE supply unit: Deliver up to 150W through the 10 front Ethercon connectors

■GigaCore 16Xt

Connectivity:
12 x 10/100/1000Mbps Ethernet connections on Neutrik Ethercon connector
(10 on the front , 2 at the rear)
4 x SFP cages (Accept 100/1000Mbps compliant mini GBIC transceiver)
1 x IEC power inlet
1 x Molex Micro-Fit 6 pin connector for redundant PSU
1 x Molex Micro-Fit 6 pin connector for redundant PoE supply
1 x RJ45 for serial console port
1 x RJ45 for expansion port

Features:
Wire-speed Layer 2/3 Switching
Sound protocol compliant: Low jitter
Industry specific web interface
Front end display for basic configuration
RLinkX: Activate redundancy on ports to create secured links
Group: Create group within your network for a better network isolation
Port status
3 LEDs per port: PoE, RLinkX, Link/Speed
4 status LEDs for the device: OK, PoE, RLinkX*, Power
Redundant fans
Universal power supply: 100-240VAC

Options:
PoE supply unit: Deliver up to 150W through the 10 front Ethercon connectors
Backup PSU
Backup PoE supply unit

■Ethernet-DMX8 MkII

Connections:
2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors
8 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A)

Features:
DMX routing, universe setting
Input and output enable / disable
DMX output frame rate setting
Supported protocols: DMX, DMX512-A, RDM, Art-Net?, sACN
Protocol selection per port
IP settings
Unit ID and labeling
Ethernet activity indication on front panel
Up to 40 programmable profiles and routings
Up to 10 predefined profiles (splitters, mergers…)
Multi language Web interface

Operation:
Ethernet <-> DMX conversion
Ethernet and DMX Merger
Ethernet and DMX Backup
DMX splitter / booster
DMX trigger. Remote selection of the control source
Built-in DMX softpatch
Wysiwyg enabled. DMX inputs can be visualised in Wysiwyg
DMX snapshot. Capture 3 fixed lighting states per outlet
Modification of captured values from the Web interface
Auto-load capture on boot-up (ideal for expo)

■DMX512-A 2.10 Hub

Connections:
2 x DMX512-A in/outputs on 5 pin male XLR, with termination (RDM compliant)
10 x DMX512-A in/outputs on 5 pin female XLR, with termination (RDM compliant)
1 x IEC socket with fuse holder (90-260 VAC, 47-63 Hz)
2 x DMX512-A in/outputs on 5 pin male XLR on the back panel (identical to the 2 zone inputs on the front end)
Availables connectors : Neutrik XLR 3 & 5 pins, Ethercon. Mixed configurations on demand